胶衣树脂专用流平剂

  11040

Leveling additive and air release agent for gel coats that are based on unsaturated polyesters, epoxides, and polyurethanes. The additive is preferably used in combination with air release agents such as AMA-801

Product Data

Composition

Solution of a polyacrylate

Typical Properties

The values indicated in this data sheet describe typical properties and do not constitute specification limits.

Density (68 °F):                                         7.91 lbs/US gal

Refractive index (68 °F):                            1.480

Non-volatile matter (20 min., 302 °F):        100 %

Flash point:                                                 113 °F

Applications

Ambient curing resin systems

Special Features and Benefits

 significantly improves the leveling properties in gel coats that are based on unsaturated polyester resins, and is preferably used in combination with air release agents such as  The additive is used as an air release agent in polyurethane systems and promotes leveling in solvent-free epoxy resin coatings.

Recommended Levels

0.5-1.5 % additive (as supplied) based on the total formulation.

The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

Incorporation and Processing Instructions

The additive is preferably added to the resin before adding the other raw materials, and can also be easily incorporated in the finished system.


The above mentioned data are believed to be accurate and reliable and they don’t imply any warranty or responsibility from Aoseyunthisdatasheet don't exempt the customer to check the suitability of this product throughout its own Q.C. procedures.

以上数可靠,意味公司任和责任术资料免除客自己的序 对本产合性的验.